EBS01095 TROUBLESHOOTING EBS01043 1. Main and four-wheel-drive motor fuses The four-wheel-drive motor indicator light fails to come on. Check the main and four-wheel-drive motor fuses for continuity. Refer to “CHECKING THE FUSES” in chapter 3. Are the main and four-wheel-drive motor fuses OK? Check: 1. main and four-wheel-drive motor fuses 2. battery 3. main switch 4. four-wheel-drive motor relay 1 5. four-wheel-drive motor relay 2 6. four-wheel-drive motor relay 3 7. on-command four-wheel-drive motor switch and differential gear lock switch 8. differential gear motor 9. wiring connection (the entire 2WD/4WD selecting system) YES NO Replace the fuse(s). EBS01044 NOTE:
_ Before troubleshooting, remove the following part(s): 1. seat 2. battery cover Troubleshoot with the following special tool(s). Pocket tester 90890-03112 Analog pocket tester YU-03112-C Clean the battery terminals. Recharge or re- place the battery. EBS01041 3. Main switch Check the main switch for continuity. Refer to “CHECKING THE SWITCHES”. Is the main switch OK? YES NO Replace the main switch. 9 - 55 2WD/4WD SELECTING SYSTEM ELEC – + ELEC – + 2. Battery • Check the condition of the battery. Refer to “CHECKING AND CHARGING THE BATTERY” in chapter 3. Minimum open-circuit voltage 12.8 V or more at 20 °C (68 °F) • Is the battery OK? YES NO NO