EBS01096 4. Four-wheel-drive motor relay 1 EBS01097 5. Four-wheel-drive motor relay 2 Remove the four-wheel-drive motor relay 1 from the wire harness. Connect the pocket tester ( Ω Ч 1) and the battery (12 V) to the four-wheel-drive motor relay 1 terminals. Remove the four-wheel-drive motor relay 2 from the wire harness. Connect the pocket tester ( Ω Ч 1) and the battery (12 V) to the four-wheel-drive motor relay 2 terminals.
Positive tester probe black/yellow 1 Negative tester probe black 2 Positive tester probe brown/black 1 Negative tester probe black 2 Positive battery terminal brown/red 3 Negative battery terminal blue/red 4 Positive battery terminal brown/red 3 Negative battery terminal blue/green 4 Positive tester probe black/yellow 1 Negative tester probe brown/red 5 Positive tester probe brown/black 1 Negative tester probe brown/red 5 Check the four-wheel-drive motor relay 1 for continuity. Check the four-wheel-drive motor relay 2 for continuity. YES NO YES NO Replace the four- wheel-drive motor relay 1. Replace the four- wheel-drive motor relay 2. 9 - 56 2WD/4WD SELECTING SYSTEM ELEC – + ELEC – +