EBS01098 6. Four-wheel-drive motor relay 3 EBS01092 7. On-command four-wheel-drive motor switch and differential gear lock switch Remove the four-wheel-drive motor relay 3 from the wire harness. Connect the pocket tester ( Ω Ч 1) and the battery (12 V) to the four-wheel-drive motor relay 3 terminals. Check the on-command four-wheel-drive motor switch and differential gear lock switch for continuity. Refer to “CHECKING THE SWITCHES”. Is the on-command four-wheel-drive motor switch and differential gear lock switch OK?
Positive battery terminal brown/red 1 Negative battery terminal yellow/black 2 YES NO Positive tester probe brown 3 Negative tester probe gray 4 Replace the on-com- mand four-wheel- drive motor switch and differential gear lock switch. Check the four-wheel-drive motor relay 3 for continuity. YES NO Replace the four- wheel-drive motor relay 3. 9 - 57 2WD/4WD SELECTING SYSTEM ELEC – + ELEC – +