Routine Maintenance 5.1 Maintenance Schedule Maintenance step= E Check= Adjust= Clean= Before or during 1st test run, during commissioning check twice daily or when commissioning new or reconditioned engines Every 10 operating hours or daily In operating hours (OH), every E10 E20 E30 E40 E50 E60 E70* Years 500 1000 1500 2000 10000 13000 1 2 © 2002 5 Maintenance step= E Check= ● Adjust= ❍ Clean= ▲ Replace= ■ Industrial engines The specified engine maintenance times are the max. permissible recommended times. Depending on the application shorter maintenance times may be necessary. Please refer to manufacturer’s operating manual.
# Maintenance work to be carried out only by authorised service personnel.
Section Before or during 1st test run, during commissioning check twice daily or when commissioning new or reconditioned engines Every 10 operating hours or daily In operating hours (OH), every *E70=1012 Engines 10000OH *E70=1013 Engines 13000OH E10 E20 E30 E40 E50 E60 E70* Years 500 1000 1500 2000 10000 13000 1 2 Operation Every 10 operating hours or daily In operating hours (OH), every *E70=1012 Engines 10000OH *E70=1013 Engines 13000OH E20 E30 E40 E50 E60 E70* Years 500 1000 1500 2000 10000 13000 1 2 Operation In operating hours (OH), every E30 E40 E50 E60 E70* Years 500 1000 1500 2000 10000 13000 1 2 *E70=1012 Engines 10000OH *E70=1013 Engines 13000OH Operation ● ● Lube oil level, top up as necessary 6.1.2/3.1.6 ■ Lube oil (oil changing interval acc.
to engine application), see TR0199-99-3002 6.1.1/6.1.2 ■ Oil filter cartridge (for every lube oil change) 6.1.3 ■ Fuel filter cartridge 6.2.1 ● ■ Flexible fuel leakage lines (replace completely) 6.2.5 ● ▲ ■ Fuel pre-filter * (change filter element if necessary) 4.2/ 6.2/2-4 ● ● ■ Coolant (additive concentration) 4.3.1/ 2/ 3 ● ● Coolant liquid level – ● ● ■ Dry/suction air filter (if present service as per maintenance display) 6.4.3 /4 ● ▲ ▲ Charge cooler (drain lube oil / condensate) 6.3.9 ● Battery and cable connections 6.7.1 ● Sheathed-element glow plugs – ● ● Engine monitoring, warning system 3.3 # ❍ Valve clearance (set if necessary, earlier if noises occur) 6.6.1# ● ● ■ V-belts (retighten or replace as necessary) 6.5