6.5.14Tensioning Coolant / Fuel Pump Belts 1013 E 6.5.15Changing Coolant / Fuel Pump Belts 1013 E 6.5.16Tensioning / Changing Compressor Belt 6.6 Adjustments 6.6.1 Checking / Adjusting Valve Clearances 6.7 Accessories 6.7.1 Battery 6.7.1.1 Checking Battery and Cable Connectors 6.7.1.2 Checking Electrolyte Level 6.7.1.3 Checking Specific Gravity of Electrolyte 6.7.2 Three-Phase Alternator 6.7.3 Lifting Tackle 7. Faults, Causes and Remedies 7.1 Fault Table 9. Technical Specification 9.1 Engine Specifications and Settings 9.2 Screw Tightening Torques 9.3 Tools 8. Engine Preservation 8.1 Preservation 10.
Service 6.3.6 Filling/Venting the Cooling System 1012 E/1013 E 6.3.7 Draining the Cooling System Unit Engine 6.3.8 Filling/Venting the Cooling System Unit Engine 6.3.9 Draining the Charge-Air Cooler 6.4 Combustion Air Cleaner 6.4.1 Cleaning Intervals 6.4.2 Emptying Cyclone Type Precleaner 6.4.3 Cleaning Oil Bath Air Cleaner 6.4.4 Dry Type Air Cleaner 6.5 Belt Drives 6.5.1 Checking V-Belts 6.5.2 Tensioning Fan / Alternator Belts 1012 6.5.3 Changing Fan / Alternator Belts 1012 6.5.4 Tensioning Coolant / Fuel Pump Belts 1012 6.5.5 Changing Coolant / Fuel Pump Belts 1012 6.5.6 Tensioning Coolant / Fuel Pump Belts 1012 E 6.5.7 Changing Coolant / Fuel Pump Belts 1012 E 6.5.8 Tensioning Alternator Belt 1012 E 6.5.9 Changing Alternator Belt 1012 E 6.5.10Tensioning / Changing Fan Belt 1013 6.5.11Tensioning Coolant / Fuel Pump belts 1013 6.5.12Changing Coolant / Fuel Pump Belts 1013 6.5.13Tensioning / Changing Alternator Belt 1013 6.
Service and Maintenance 6.1 Lubrication System 6.1.1 Oil Change Intervals 6.1.2 Checking Oil Level / Changing Engine Oil 6.1.3 Changing Oil Filter 6.1.4 Cleaning/Changing Oil filter (Cup) 6.2 Fuel System 6.2.1 Changing Fuel Filter 6.2.2 Replace fuel filter 6.2.3 Clean/Replace Fuel Pre-Filter, Filter Element 6.2.4 Venting the Fuel System with Preliminary Fuel Filter 6.2.5 Clean/Replace Fuel Pre-Filter, Filter Element 6.2.6 Vent Fuel System with Fuel Pre-Filter 6.2.7 Clean/Replace/Vent Fuel Pre-Filter, Filter Element 6.2.8 Clean / purge or change fuel pre-filter 6.2.9 Venting the Fuel System with Preliminary Fuel Filter 6.2.10 Changing Fuel Leakage Line 6.2.11 Changing Fuel Leakage Pipes 6.3 Cooling System 6.3.1 Cleaning Intervals 6.3.2 Cleaning Cooling System 6.3.3 Draining Cooling System 1012 / 1013 6.3.4 Filling / Venting Cooling System 1012 / 1013 6.3.5 Draining the Cooling System 1012 E / 1013 E Contents