6 © 2002 6.5 Belt Drives Service and Maintenance © 26 345 0 © 26 450 0 Reinstall fan / alternator belt and retension as described in 6.5.10 and 6.5.13. ! Push fuel pump 3 in direction (A) of arrow until correct belt tension is achieved. Check, tension and change belts only with the engine off. Refit belt guard, if provided. 6.5.11 Tensioning Coolant / Fuel Pump belts 1013 Slacken off bolts 1 and 2. Tighten bolts 1 and 2. Slacken off bolts 1 and 2. Tensioning: Insert square wrench in square and pull in direction of arrow until correct belt tension is achieved. Changing: Insert square wrench in square and loosen in opposite direction of arrow. Tension new belt as described above.
6.5.10 Tensioning / Changing Fan Belt 1013 Tighten bolts 1 and 2. © 26 345 0 © 26 345 0 © 26 450 0 © 26 450 0 © 26 450 0 © 26 450 0