Service and Maintenance 6.7 Accessories © 25 895 0 © 25 896 0 6.7.1 Battery 6.7.1.1Checking Battery and Cable Connectors 6.7.1.2Checking Electrolyte Level If testers 2 are used, the electrolyte should come up to their base. If testers are not used, the electrolyte level should be 10-15 mm above the top of the plates. If necessary, top up with distilled water. Remove caps 1. Replace caps. Clean terminal posts (+ and –) and clamps of the battery, and grease with acid-free and acid-resistant grease. When reassembling, ensure that clamps make good contact. Do up clamp bolts finger tight. Keep battery clean and dry. Undo dirty clamps.
© 2002 6 © 25 895 0 © 25 895 0 © 24 232 3 © 24 232 3 © 25 896 0 © 25 896 0