EXPLANATION OF COMPONENTS OPERATION METHOD OF OPERATION METHOD OF SETTING PRESET BUTTONS 1. Press power switch (1) and display the frequency on dis- play (7). 2. Turn the tuning button (manual, auto) to adjust to the desired frequency. 3. Select a preset button to use for recording the frequency setting, and keep that button pressed for at least 1.5 sec- onds. The sound will disappear, but when the setting is recorded, the sound will appear and the preset number will appear on display (7) to show that the station has been preset. After completion of presetting, press preset button (6), and release it within approx. 1.5 seconds.
The setting will change to the frequency of the broadcasting station recorded for that button. One AM station and one FM sta- tion can be recorded for each preset button. MANUAL TUNING Press tuning button (5) and set to the desired frequency. Each time the button is pressed, the frequency will move up or down in steps of 9 kHz (AM) or 0.1 MHz (FM). button: Move to a higher frequency station button: Move to a lower frequency station G If the frequency reaches the top or bottom limit, it will automatically change as follows: top limit bottom limit, or bottom limit top limit AUTOMATIC TUNING Keep tuning button (5) pressed for at least 0.5 seconds.
When a broadcasting station is picked up, it will automati- cally stop. To search for the next station, press tuning button (5) again for at least 0.5 seconds. button: Move to a higher frequency station button: Move to a lower frequency station G If tuning button (5) is pressed during auto tuning, the auto tuning will be canceled and the frequency at the point where it is canceled will be picked up. 3-38