Push the button vibration on/off ( 3 ) in order to activate the vibration. Implications: The manual vibration mode MAN w/o auto stop has been set: Vibration at a low/high frequency is possible, depending on the position of the lever Vibration at the front drum or the front and rear drum If the vibration mode has been activated by means of button 3 : Setting the control lever ( 1 ) to position 0 does not automatically deactivate the vibration mode. Button 3 needs to be pushed in order to deactivate the vibration. Driver`s compartment 3 - 7 Issue: 01-10 Selector switch Vibration mode ( 4 ) in position MAN :
manual vibration control is activated Setting the frequency lever ( 2 ) to the desired Diesel engine speed & vibration frequency: • Frequency lever set to Position B : low frequency 52/53 Hz • Frequency lever set to Position C : high frequency 58/61 Hz Operation without auto stop: low or high vibration frequency Selector switch Drum Vibration ( 5 ): • forward: Vibration at the front drum only • backward: Vibration at the front and rear drum Settings: 3.1.5 Roller operation without auto stop function 3 MAN 1 0 3 5 1 4 C 2 Vibration is not automatically deactivated B A