Implications: The auto stop vibration mode has been set: Vibration at a low/high frequency is possible, depending on the position of the lever Vibration at the front drum or the front and rear drum If the vibration mode has been activated by means of button 3 : Setting the control lever ( 1 ) to position 0 automatically deactivates the vibration mode. Button 3 does not need to be pushed in order to deactivate the vibration. Driver`s compartment 3 - 8 Issue: 01-10 Selector switch vibration mode ( 4 ) in position Auto : vibration control with auto stop is activated Setting the frequency lever ( 2 ) to the desired Diesel engine speed & vibration frequency: • Frequency lever set to Position B :
low frequency 52/53 Hz • Frequency lever set to Position C : high frequency 58/61 Hz Push the button Vibration on/off ( 3 ) in order to activate the vibration. Operation with auto stop: low or high vibration frequency Selector switch drum vibration ( 5 ): • forward: Vibration at the front drum only • backward: Vibration at the front and rear drum Settings: 3 1 3.1.6 Roller operation with auto stop 0 Auto 4 3 5 1 C 2 Vibration is automatically deactivated B A