INSTRUMENTS AND CONSOLES (CONT’D) Function Icons The table below shows the Icons, their function and other important information. This is the normal operating condition. These functions are monitored and have SERVICE CODES associated with them, See SYSTEM SETUP and ANALYSIS Page SA-3 for descriptions of SERVICE CODES. * Figure OI-4 DELUXE Panel Shown 1 3 9 11 2 4 5 6 7 8 10 P16616 The right console contains the instrument panel with Function Icons [Figure OI-4] . 325/328 Excavator 5 Operation and Maintenance Manual REF.
FUNCTION ICON/LIGHT ALARM CONDITION/ CODE DESCRIPTION 1 Auxiliary Hydraulics OFF CONTINUOUS FLASHING --- --- 3 Beeps --- --- Error ♦ Auxiliary Hydraulics Button pressed, hydraulic functions available. Error with Auxiliary Hydraulics. 2 Two-Speed Driving OFF CONTINUOUS FLASHING --- --- 3 Beeps --- --- Error ♦ Two-Speed activated, High Range engaged Solenoid Error 3 Hydraulic/ Traction Drive CONTINUOUS OFF FLASHING FLASHING --- --- 3 Beeps CONTINUOUS * --- Error ♦ Error ♦ Left Console down. Hydraulic/Traction Drive functions activated Left Console up.
Hydraulic/Traction Drive functions deactivated Error with console sensor or workgroup solenoid Workgroup solenoid not connected 4 Glow Plugs OFF CONTINUOUS FLASHING --- --- 3 Beeps * --- Error ♦ Glow Plugs energised Error with Glow Plugs 5 System Voltage OFF FLASHING --- 3 Beeps 3 Beeps CONTINUOUS CONTINUOUS * Error ♦ Warning ♦ Warning ♦ Shutdown ♦ Voltage out of range Voltage low or high Voltage extremely high Voltage extremely low - Engine will stop in 10 seconds. 6 Engine Oil Pressure OFF CONTINUOUS CONTINUOUS FLASHING --- 3 Beeps 3 Beeps CONTINUOUS * Error ♦ Warning ♦ Shutdown ♦ Engine Oil Pressure sender out of range. Engine Oil level low.
Engine Oil pressure very low, Engine will shutdown in 10 seconds. 7 Hydraulic Oil Filter and Temperature OFF FLASHING CONTINUOUS CONTINUOUS FLASHING --- 3 Beeps 3 Beeps 3 Beeps CONTINUOUS * Warning ♦ Error ♦ Warning ♦ Shutdown ♦ Error with Hydraulic Filter Hydraulic Oil Temperature out of range Hydraulic Filter plugged or temperature high Hydraulic Oil Temp. extremely high - Engine will stop in 10 seconds. 8 General Warning OFF CONTINUOUS CONTINUOUS FLASHING --- 3 Beeps 3 Beeps CONTINUOUS * Error ♦ Warning ♦ Shutdown ♦ Error with one or more engine, hydraulic, or fuel functions.
Low fuel, engine speed high, coolant temperature high Coolant temperature or engine speed extremely high - Engine will stop in 10 seconds. 9 Keypad Unlocked ON OFF --- --- --- --- Panel is unlocked 10 Seat Belt ON --- --- Light stays on for 45 seconds to remind operator to fasten seat belt. 11 Low Fuel OFF CONTINUOUS --- 3 Beeps --- Warning Light stays on