INSTRUMENTS AND CONTROLS (CONT’D) OPERATOR CANOPY (ROPS/TOPS) Two-Speed Driving Description Figure OI-7 WARNING Never modify operator cab by welding, grinding, drilling holes or adding attachments unless instructed to do so by Bobcat. Changes to the cab can cause loss of operator protection from rollover and falling objects, and result in injury or death. 1 W-2069-1299 The excavator has an operator canopy (ROPS/TOPS - Roll Over Protective Structure/Tip Over Protective Structure) as standard equipment. The ROPS/TOPS meets ROPS ISO 3471 and TOPS ISO 12117. P-49128 An enclosed cab (ROPS/TOPS) is an Option or can be installed as a Field Accessory.
Figure OI-8 Both the cab and canopy provide operator protection if the excavator is tipped over. The seat belt must be worn for ROPS/TOPS protection. 2 P16616 Push the button (Item 1) [Figure OI-7] to engage the High Range. When High Range is engaged, the two speed driving icon (Item 2) [Figure OI-8] will light up. Press the button again to disengage. 325/328 Excavator 7 Operation and Maintenance Manual