ATTACHMENTS (CONT’D) Figure OI-63 Using The X-Change System (Cont’d) Installing Bucket Or Attachment (Pin On X-Change) (Cont’d) Figure OI-62 1 2 1 2 3 P-49837 Raise the boom and extend the bucket cylinder until the X-Change contacts the attachment back [Figure OI-63] . With the arm vertical, lower the boom until the hooks (Item 1) of the bucket disengage the pins (Item 2) of the X-Change and the plate (Item 3) [Figure OI-63] fully engages in the bucket crossmember. P-49835 Raise the boom until the pins (Item 1) engage the hooks (Item 2) [Figure OI-62] on the bucket. WARNING Keep all onlookers 6 m away from equipment when operating.
Contact with moving parts, a trench collapse or flying objects can cause injury or death. W-2119-0788 325/328 Excavator 27 Operation and Maintenance Manual