Safety - Section 22 8/11 OM2221 Page 22-8 PRODUCT IDENTIFICATION PLATE MDS - Character positions 4, 5, 6, 7 and 8 identify the Machine Descriptor Section (MDS). The MDS code identifies general information regarding machine specifications. The MDS is a code for the machine type and model. A product identification plate is located on the frame in front of the right side front wheel. It shows the Truck Model Number, Maximum GVW, and Product Identification Number (PIN). CL - Character position 9 identifies the Check Letter (CL). The CL is used to verify the accuracy of the individual PIN. FC - Character positions 10 and 11 identify the Factory Code (FC).
The FC identifies the Komatsu factory in charge of claims for the product. The FC for electric drive trucks is 61. SN - Character positions 12, 13, 14, 15, 16 and 17 identify the Serial Number (SN). The SN is a unique sequential number. The Product Identification Number (PIN) consists of a total of 19 characters. The first and last characters are tamper preventive symbols (*). The remaining 17 alpha/numeric characters are used to identify the following five characteristics of the machine: WMC - Character positions 1, 2 and 3 identify the Worldwide Manufacturer Code (WMC). The WMC designates the manufacturer of the product. Komatsu brand products are identified with the letters KMT.
LUBRICATION CHART The lubrication chart is mounted on the right side of the radiator grille structure. Refer to Section 40, Lubrication and Service, for more complete lubrication instructions.