. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING CAUTION REMARK checking. (G) into the oil filler pipe, then 3 - 43 Engin e parts and oil are at high tem perature immediately after the engine is stopped, and will cause serious burns. Wa it for the temperature to cool down before sta When carrying out inspection and se rvice inside the engine rear cover, always open the cover fully until it is secured in position by th e rod. If the machine is at an angle, When checking the oil level a fter the engine has been operated, allow the engine to cool for 15 minute s before 1. 2. Open the engine rear cover. Remove dipstick (G) and wi 3.
Completely insert dipstick r emove it and check the oil l 4. T he oil level should be betwe en the H and L marks on dipstick ( I G). f the oil level is below the L mark, add oil through oil filler (F). 5. I f the oil is above the H mark , drain the excess engine oil from d rain plug (P), and check the oil level again. hten the oil filler, then close the 6. I f the oil level is correct, tig ngine rear cover. e