Operating & maintenance manual 1.7.2 Further notes on this operating and maintenance manual Every effort has been made to provide accurate and complete information. However, we cannot guarantee that there will be no errors. Hyundai does not assume any liability for the accuracy or completeness of the information in this operating and maintenance manual. Due to the permanent development, advancement and improvement of our products, we reserve the right for modifications without prior notice. All descriptions, illustrations, indications of weight and technical specifications are without obligation and represent the state as of printing this issue.
All images and drawings are merely intended to serve as an illustration of certain aspects of the operation and maintenance of the compaction roller in question. The illustrations may differ from the actual scope of delivery of the compaction roller. 1.8 Vibrations 1.8.1 Hand and arm vibration The hand and arm vibration that occurs under normal working conditions, with the machine put to its designated use, is less than 2.5 m/s 2 (weighted effective value) in accordance with ISO 8041.
1.8.2 Whole-body vibration The level of whole-body vibration in a construction machine is largely determined by a variety of factors, such as the manner of handling the vehicle, the type of soil and the working speed set by the driver. In addition, these factors vary with the different designs of the machines. The whole-body vibration level of the machine in real working conditions within the designated areas of application is less than 0.5 m/s 2 (weighted effective value), in accordance with ISO 8041. In order to keep the level of whole-body vibration as low as possible and to prevent damage to the driver`s health, please note:
The driver`s seat is to be set to the individual weight and height of the driver. Make sure the soil at the construction site is always kept in good condition. The compaction roller shall be put to the designated use only. Handling of the machine and the operation mode need to be adjusted to the environmental conditions, such as the type of soil. 13 This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death!