Operating & maintenance manual 4 Transporting the compaction roller 4.1 Securing and loading the compaction roller before transporting it 4.1.1 Loading the compaction roller onto a flat bed truck Check the position X of the ramps of the flat bed truck before driving the compaction roller onto it. The ramps need to be positioned in a way that ensures that the tires roll on the center of the ramps. Start the Diesel engine. Release the parking brake. The symbol for the parking brake on the dashboard is deactivated. Drive the compaction roller onto the flat bed truck in reverse gear, with the rear of the roller ahead. Activate the parking brake and stop the diesel engine.
The activation of the parking brake is indicated by the corresponding symbol on the dashboard. Remove the ignition key and lock the doors after getting off the vehicle. Fig. 5 Driving onto a flat bed truck 19 WARNING Secure attachments and objects in the cab before carrying out the transport! Remove any objects attached to the exterior of the vehicle and transport them separately. Remove or fasten objects that are kept in the vehicle. WARNING Precautionary measures for transporting the compaction roller! The compaction roller may be loaded and unloaded by adequately trained persons only. It may only be loaded and unloaded on level, solid ground.
Do not overload the transport vehicle. Observe the total weight of the compaction roller, see Technical specifications. X