GENERAL ASSEMBLY DRAWING D65E-12 D65EX-12 Tiltdozer 014012 Note: The values without ( ) are the values when the tiltdozer or semi-U blade are installed. The values with ( ) are the values only when the semi-U blade is installed. The values with [ ] are the values only when the wide gauges spec. semi-U blade is installed. 01-2 I D65E-12 60001 – 60947 60948 – 65000 65001 – — D65EX-12 60001 – 60941 60942 – 65000 65001 – 65001 – A Blade width (mm) 3,415 (3,360) 3,415 (3,460) 3,415 (3,460) [3,640] B Max.
tilting distance (mm) 870 (855) 870 (855) 870 (855) [820] C Height of exhaust pipe end (mm) 2,980 2,980 2,990 2,990 D Height of lift cylinder end (mm) 2,870 2,870 2,875 2,875 E Overall length (mm) 5,260 (5,390) 5,260 (5,750) 5,260 (5,440) [5,445] F Max. lift above ground (mm) 1,100 (1,095) 1,100 (1,095) 1,105 [1,100] G Max. drop below ground (mm) 450 450 440 [445]