Component identification Component identification 1 2 9 10 3 8 11 12 7 6 13 4 14 5 340 424 The illustration shows a normal version of a DC16 engine. The engine ordered may have different equipment. Note: The oil cooler is located on the top of the engine between the cylinder banks. The water separating prefilter for the fuel is lo- cated between the fuel tank and engine. 1. Centrifugal oil cleaner 8. Oil filter 2. Oil filler 9. EGR valve 3. Turbocharger 1 10. Engine control unit 4. Starter motor 5. Oil dipstick 11. Engine data plate 12. Coolant pump 6. Valve for draining coolant 13. EGR cooler 7. Fuel filter 14. Oil plug 1.
The DC16 084A/384A may be equipped with an exhaust brake which is connected to the turbocharger. OPM 300 en-GB 20 © Scania CV AB 2015, Sweden