TROUBLESHOOTING/ Monitor Unit ATTACHMENT SELECTION (Only Machines Equipped with Optional Parts) IMPORTANT: Select the attachments from the work mode screen. In order to display the work mode screen, push key F1 after primary screen appears, or select from main menu. Selecting Attachment by Using Key F1 1. When the primary screen appears, push key F1 and display the work mode screen. 2. Push a relevant key under an attachment mark to be used in order to select the attachment. (In the right example, Crusher 1 is selected.) Key F1 Primary Screen T1V1-05-01-123 NOTE: When selecting Digging, return to the pri- mary screen. 3.
On the attachment specification screen, confirm if specification of the installed attachment agrees with that displayed on the screen. Digging Back Key NOTE: When pushing the back key, return to the previous screen. 4. Push confirm the key, and the primary screen appears. Select Crusher 1 Work Mode Screen T1V5-05-01-109 Back Key Confirm Key T1T1-05-02-004 Attachment Specification Screen T5-2-44