TROUBLESHOOTING/ Monitor Unit Selecting Attachment from Main Menu 1. When the primary screen appears, push the menu key and display main menu. 2. Select work mode from main menu by using keys 1 and 2. Push the confirm key. Then, the work mode screen appears. 3. Push the relevant key under an attachment mark to be used in order to select the attachment. (In the right example, Crusher 1 is selected.) Menu Key NOTE: When selecting digging, return to main menu. 4. On the attachment specification screen, confirm if specification of the installed attachment agrees with that displayed on the screen. If they do not match, perform the setting of at- tachment by using Dr. ZX.
For details of the attachment specification screen, refer to T5-2-46 and 47. Primary Screen T1V1-05-01-123 NOTE: When pushing the back key, return to the previous screen. 5. Push the confirm key, and the primary screen appears. Back Key Confirm Key Key 1 Key 2 T1V5-05-01-019 Digging Back Key Select Crusher 1 Work Mode Screen T1V5-05-01-109 Back Key Confirm Key Attachment Specification Screen T1T1-05-02-004 T5-2-45 B her 1