Lubricants, sealants and bonding agents Text-module 1) = Lithium-saponified, dripping point approx. 185 ° C, worked penetration coefficient 265 to 295 (soft) 2) = Alvania 2 or Renolit MP 3) = Components which are to be bonded must be free of paint, oil and grease. Apply synthetic bonding agent to the dry joint surfaces of both components; after mating them, leave them for the specified curing time without exposing them to the air. Fav 900 chassis number 23/3001 and up General Fav 900 Tractor / General system Fuels and lubricants A High-pressure grease for long-term lubrication, e.g.
for splined shaft profiles X 902.002.472 long-life grease Grease for lubricating sealing lips of shaft seals Multi-purpose grease 1) and 2) Sealant (fully curing) for shaft seals with steel cage Serdon X 903.051.711 Shaft seals with rubberised outer ring Coat outer rings with Spirit/water mixture 1:1 Sealant (not fully curing) for surfaces of gearbox housing Loctite X 903.050.074 Sealant e.g.
for Hall-effect sensors with rotational direction sensor (non-curing) F 119.200.210.930 Synthetic bonding agent Normal Loctite bolt-sealant X 903.050.084 3) Synthetic bonding agent Loctite high-strength X 903.050.091 3) High-speed cleaner for use against grease and oil, 520 ml spray can X 907.505.000 Date Version Page Fuels and lubricants Capitel Index Docu-No. 12.11.2001 a 2/2 0000 A 000029