00 Index and foreword SEN00056-01 Type 3 1. Disconnection 1) Hold the tightening portion and push body (9) straight until sliding prevention ring (8) contacts contact surface (b) of the hexag- onal portion at the male end. (Fig. 10) 2) While holding the condition of Step 1), push cover (10) straight until it contacts contact surface (b) of the hexagonal por- tion at the male end. (Fig. 11) 3) While holding the condition of Steps 1) and 2), pull out whole body (9) to discon- nect it. (Fig. 12) 2. Connection q Hold the tightening portion and push body (9) straight until the sliding prevention ring contacts contact surface (b) of the hexag- onal portion at the male end. (Fig.
13) D65EX, PX, WX-15E0 23