224 MULTIMEDIA phone is currently connected with the system, this pop-up will not appear. 7. When your mobile phone finds the Uconnect system, select “Uconnect.” Selecting “Ok” or “Allow” will sync your contacts with the Uconnect system. You can also use the following VR command to bring up the Paired Phone screen from any screen on the radio: 3. Select “Yes” to begin the pairing process. 8. When prompted on the mobile phone, accept the connection request from Uconnect. 4. Search for available devices on your Bluetooth®-enabled mobile phone. 9. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone.
Selecting “Yes” will make this phone the highest priority. This phone will take precedence over other paired phones within range and will connect to the Uconnect system automatically when entering the vehicle. Only one mobile phone and/or one Bluetooth® audio device can be connected to the Uconnect system at a time. If “No” is selected, simply select “Uconnect” from the mobile phone/audio device Bluetooth® screen, and the Uconnect system will reconnect to the Bluetooth® device. Press the Settings button on your mobile phone. NOTE: Software updates on your phone or the Uconnect system may interfere with the Bluetooth® connection. If this happens, simply repeat the pairing process.
However, first make sure to delete the device from the list of phones on your Uconnect system. Next, be sure to remove Uconnect from the list of devices in your phone’s Bluetooth® settings. “Show Paired Phones” Select “Bluetooth®” and ensure it is enabled. Once enabled, the mobile phone will begin to search for Bluetooth® connections. NOTE: During the pairing procedure, you may receive a pop-up on your touchscreen asking you to make sure the PIN on the touchscreen matches the PIN from the pop-up on your mobile phone. 5. If “No” is selected, and you still would like to pair a mobile phone, press the Phone Pairing or Settings button from the Uconnect Phone main screen.
CONNECTING TO A PARTICULAR MOBILE PHONE OR AUDIO DEVICE AFTER PAIRING Uconnect Phone will automatically connect to the highest priority paired phone and/or Audio Device within range. If you need to choose a particular phone or audio device follow these steps: Press the Paired Phones button or the Add Device button. NOTE: For phones which are not made a favorite, the phone priority is determined by the order in which it was paired. The most recent phone paired will have the higher priority. Search for available devices on your Bluetooth®-enabled mobile phone (see below). When prompted on the phone, select “Uconnect” and accept the connec tion request. 1.
Press the Settings button on the touchscreen. NOTE: During the pairing procedure, you may receive a pop-up on your mobile phone for the Uconnect system to access your “messages” and “contacts”. 2. Press the Paired Phones or Audio Sources button. 3. Press to select the particular phone or the particular audio device. A pop-up menu will appear; press “Connect Phone”. 6. Uconnect Phone will display an in-progress screen while the system is connecting. 4. Press the X to exit out of the Settings screen.