34 GETTING TO KNOW YOUR VEHICLE Push the heated seat button a third time to turn the LO setting on. Push the heated seat button a fourth time to turn the heating elements off. Press the ventilated seat button a third time to choose LO. Push the heated seat button a fourth time to turn the heating elements off. NOTE: Press the ventilated seat button a fourth time to turn the ventilation off. NOTE: The level of heat selected will stay on until the operator changes it. NOTE: The engine must be running for the ventilated seats to operate. For information on use with the Remote Start system, see Ъ page21. H EAD R ESTRAINTS The engine must be running for the heated seats to operate.
Once a heat setting is selected, heat will be felt within two to five minutes. The level of heat selected will stay on until the operator changes it. The engine must be running for the heated seats to operate. V ENTILATED S EATS — I F E QUIPPED For information on use with the Remote Start system, see Ъ page21. Rear Heated Seats Front Ventilated Seats Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear. On some models, the two outboard rear seats are equipped with heated seats.
The heated seat switches for these seats are located on the rear of the center console. Located in the seat cushion are small fans that draw the air from the passenger compartment and move air through fine perforations in the seat cover to help keep the driver and front passenger cooler in higher ambient temperatures. The fans operate at three speeds, HI, MED and LO. There are two heated seat switches that allow the rear passengers to operate the seats independently. You can choose from HI, MED, LO, or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use.
All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash. WARNING! The front ventilated seats control buttons are located on the center instrument panel below the touchscreen, and are also located within the climate or controls screen of the touchscreen. Push the heated seat button once to turn the HI setting on. Press the ventilated seat button once to choose HI. Head restraints should never be adjusted while the vehicle is in motion.
Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision. Push the heated seat button a second time to turn the MED setting on. Press the ventilated seat button a second time to choose MED. Push the heated seat button a third time to turn the LO setting on.