Operation 3.3. Operation 3.3.3. Driving with the machine Start-up Careless driving may lead to accidents! Before starting to drive, ensure that no persons are near the machine and sound the horn before you drive up. 1. Start up the engine as described in chapter "3.3.2. Starting the engine" on page 3-45 2. Raise the work unit into its transport position. If the work unit is in transport position, the two red arrows of the transport position marking on the lifting cylinder are next to each other. 3. Turn the lock lever for the work unit to position '1'. The boom will then be blocked during rides on public roads and cannot be moved. 4. Press down the brake pedal and hold it in this position.
5. Release the parking brake. Press the celebration adjustment knob to this at the parking brake lever. Press down the lock- ing button of the parking brake lever. The, release the locking button. The parking brake warning light goes out. WA100M-5 – VEAM280201 3-47 CAUTION CAUTION