EXPLANATION OF COMPONENTS OPERATION FUEL CONTROL LEVER This lever(2) is used to control the engine speed and output. (a)Low idling position: Push the lever forward fully. (b)High idling position: Pull the lever fully SWING CONTROL LEVER This lever (3) is used to operate the upper structure. (a) Swing to right (b) Swing to left N (Neutral) : When the lever in this position, the upper struc- ture will be retained in the position in which they stop. DUMP BODY CONTROL PEDAL This pedal (4) is used to raise or lower the dump body. Dump body pedal (a) RAISE (b) LOWER N (Neutral) : The dump body is stopped and held in position. 3-16