OPERATION EXPLANATION OF COMPONENTS PEDAL LOCK (FOR DUMP BODY CONTROL PEDAL) Set the pedal lock to the LOCK position when not raising or lowering the dump body. If you touch the control pedal by mistake when it is not locked, it may cause a serious accident. This lock (5) is used to lock the dump body control pedal. When the cover is fitted on top of the pedal, the pedal is locked. TRAVEL LEVERS When the track frame is directed back, the operation of the travel lever is reversed. When operating the travel lever, confirm the direction of the track frame (It is directed forward when the sprocket is in front of the operator’s seat). This lever (6) is used to drive and stop the machine.
(a) FORWARD: The lever is pushed forward (b) REVERSE: The lever is pulled back N (Neutral): The machine stops 3-17 WARNING WARNING