OM3020.2 12/99 Operation - Section 3 Operator Cab and Controls Page 3-19 CENTER CONSOLE The Center Console (1, Figure 3-4) contains: (1) Center Console (2) F-N-R Selector Switch (3) Hoist Control Lever (4) Ash Tray (5) Cigar/Cigarette Lighter (6) L.H. Window Control Switch (7) R.H.
Window Control Switch (8) Engine Shutdown Switch (9) Override/Fault Reset Switch (10) BLANK - NOT USED on this truck (11) RSC “Off/On” Switch (12) Retarder Speed Control Dial (13) Propulsion System Controller (PSC) Diagnostic Port (14) Engine Diagnostic Port (15) Truck Control Interface (TCI) Diagnostic Port (16) Passenger Seat (mounted on top of the right hand portion of the Console structure) F-N-R SELECTOR SWITCH FIGURE 3-4. CENTER CONSOLE The Selector Switch (2, Figure 3-4) is mounted on a console to the right of the operator’s seat. It is a three position switch which controls the Forward-Neutral- Reverse motion of the truck.
When the Selector Switch handle is in the center “ N ” position, it is in “Neutral”. The handle must be in Neutral to start the engine. The operator can select Forward drive by moving the handle forward. Reverse drive can be selected by moving the handle to the rear. The truck should be stopped before the selector handle is moved to a drive position.