MAN-Cats System Please note! An existing laptop should, as minimum, fulfil the following criteria for EDC: S 386er processor S 4 MB RAM memory S Serial port Operating the MAN-CATS software is only possible using MS-DOS 5.0 or higher. With regard to the future diagnostic system, a suitable laptop must be acquired at the appropriate time. Laptop with the following features Suitable for the proposed diagnostic system BE 3 for MAN marine engines: S Processor 266 MHz S Memory 32 MB RAM S Hard drive min.
1,0 G Byte S CD-ROM drive S Disc drive S Lithium battery charger (without memory effect) S Track ball or touch pad S Serial interface, cable-based S TFT Display (active matrix), resolution 800 x 600 (width x height), min. 256 colour 77