SAFE OPERATION - 3 4. Never carry children on your machine. There is no safe place for them to ride. They may fall off and be run over or interfere with your control of the machine. 5. Never allow children to operate the machine even under adult supervision. 6. Never allow children to play on the machine or on the implement. 7. Use extra caution when backing up. Look behind and down to make sure area is clear before moving. C Driving the tractor on the road 1. Lock the 2 brake pedals together to help assure straight-line stops. Uneven braking at road speeds could cause the tractor to tip over.
C Operating on slopes Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. All slopes require extra caution. 1. To avoid upsets, always back up steep slopes. If you cannot back up the slope or if you feel uneasy on it, do not operate on it. Stay off slopes too steep for safe operation. 2. Driving forward out of a ditch, mired condition or up a steep slope increases the risk of a tractor to be upset backward. Always back out of these situations. Extra caution is required with 4-wheel drive models because their increased traction can give the operator false confidence in the tractor's ability to climb slopes. 3.
Keep all movement on slopes slow and gradual. Do not make sudden changes in speed, direction or apply brake and make sudden motions of the steering wheel. 4. Avoid disengaging the clutch or changing gears speed when climbing or going down a slope. If on a slope disengaging the clutch or changing gears to neutral could cause loss of control. 5. Special attention should be made to the weight and location of implements and loads as such will affect the stability of the tractor. 6. To improve stability on slope, set widest wheel tread as shown in "TIRES, WHEELS AND BALLAST" section. Follow recommendations for proper ballasting. 7. To avoid free wheeling:
A Do not shift the shuttle lever while on a slope. A Stop completely by using the brake and by depressing the clutch pedal, then shift the shuttle lever. A Start off after selecting shuttle direction, by releasing the clutch pedal. (1) Brake Pedal (LH) (2) Brake Pedal (RH) (3) Brake Pedal Lock (A) Whenever travelling on the road 2. Check the front wheel engagement. The braking characteristics are different between 2 and 4-wheel drive. Be aware of the difference and use carefully. 3. Always slow the tractor down before turning. Turning at high speed may tip the tractor over. 4. Observe all local traffic and safety regulations. Use the registration plate as required. (1) Registration plate 5.
Turn the headlights on. Dim them when meeting another vehicle. 6. Drive at speeds that allow you to maintain control at all times. 7. Do not apply the differential lock while traveling at road speeds. The tractor may run out of control. 8. Avoid sudden motions of the steering wheel as they can lead to a dangerous loss of stability. The risk is especially great when the tractor is traveling at road speeds. 9. Do not operate an implement while the tractor is on the road. Lock the 3-point hitch in the raised position.