Technical Specifications 3 3.12 Dimensions and weights Tab. 15 Dimensions and weights - Specifications refer to general-purpose bucket and 15.5 R 25 tires 1 according to ISO 6016 Tab. 16 Dimensions and weights - Specifications refer to general-purpose bucket and 15.5 R 25 tires - Stability conforms to DIN 24094 1 according to ISO 8313 Tab. 17 Bucket dimensions 1 Quick-attach system / directly mounted 32/112 TL160 Operating Manual 12.9.08 Version 1.0 Dimensions and weights Operating weight, standard equipment1 approx.
9200 kg Total length, standard bucket on ground (quick-attach system / directly mounted) 6730 / 6690 mm Total width 2300 mm Total height (cabin roof) 3030 mm Wheel base 2760 mm Tire tread with, FR / RR 1780 mm Rear overhang angle 35° Ground clearance below propeller shaft 540 mm Turning radius at outside edge of bucket in transport position (quick-attach system/ directly mounted) 5410 / 5395 mm Turning radius at inside edge of tires 2665 mm Front loader installation Quick-attach system Direct mounting Width of bucket 2300 mm 2300 mm Capacity to DIN/ISO 7546 (max. density = 1.8 t/m3) approx. 1.5 m³ approx.
1.6 m³ Payload in bucket 2700 kg 2880 kg Dump height at 45° dump angle 2890 mm 2930 mm Dump reach at max. dump height 910 mm 880 mm Max. bucket hinge pin height 3895 mm 3895 mm Tilt-back angle 50° 50° Dump angle at max.
dump height 45° 45° Digging depth, horizontal bucket 100 mm 75 mm Lift capacity at ground level1 85.5 kN 85.5 kN Ripping force at cutting edge of bucket1 83.2 kN 86 kN Tipping load, straight1 6575 kg 6575 kg Tipping load, articulated1 5780 kg 5780 kg Work cycle time, "Lift" 5.7 s 5.7 s Work cycle time “Dumping in uppermost position – IN” 3.7 s 3.7 s Work cycle time “Dumping in uppermost position – OUT” 2.0 s 2.0 s Work cycle time “Dumping in upper position” 1.4 s 1.4 s Buckets Width mm Capacity, heaped 1 m3 Max.
density (γ) t/m3 Bucket 2300 1.5 / 1.6 1.8 Bucket with bolt-on cutting edge 2300 1.5 /1.6 1.8 Earth bucket 2300 1.7 / 1.8 1.6 Earth bucket with bolt-on cutting edge 2300 1.7 / 1.8 1.6 Multi-purpose bucket 2300 1.25 / - 1.6 Multi-purpose bucket with bolt-on cutting edge 2300 1.25 / - 1.6 Light-material bucket with bolt-on cutting edge 2300 2.2 / - 1.2 Light-material bucket with bolt-on cutting edge 2500 2.6 / - 0.8 High-tip bucket 2300 1.5 1.2