Technical Specifications 3 Tab. 18 Dimensions of fork-arm connection in compliance with ISO/FEM Class 3 Form B, DIN 15 173 / ISO 2328 respectively The payloads are determined in compliance with DIN 24094 / ISO 8313 respectively with a stability factor of 1.25 or 80 % of the tipping load and the machine moving over level ground. The payloads are valid for the machine fitted with 15.5R25 tires and the equipment condition as described in compliance with ISO 6016. Tab. 19 Total lift range of fork attachment Tab. 20 Transport position of fork lift attachment If screw-on rear axle weights or rear tires with hydroinflation are used.
Attention During fork lift operations, the tire pressure of the front wheels must be increased by at least 0.5 bar. 33/112 TL160 Operating Manual 12.9.08 Version 1.0 Fork lift attachment mm Width of fork carrier 1900 Length of forks 1120 Fork cross section 140 x 50 Max. stacking height 3570 Total lift range 500 mm 19,7 inch +0,5 bar kg + +7,3 psi lbs S=2.0 S=1.25 kg 2000 3200 lbs 4710 7040 kg lbs kg 2180 3500 kg lbs lbs 4820 7700 Transport position 500 mm 19,7 inch +0,5 bar kg + +7,3 psi lbs S=1.67 S=1.25 kg 2620 3500 lbs 5770 7700 kg lbs kg 2620 3500 kg lbs lbs 5770 7700 kg lbs