11. EXPLANATION OF COMPONENTS 11.4 STEERING COLUMN TILT LEVER WARNING Stop the machine before adjusting the angle of the steering wheel. This lever allows the steering column to be tilted forward or backward. Pull the lever up and move the steering wheel to the desired position. Then push the lever down to lock the steering wheel in position. Range of adjustment: 100 mm (3.94 in) (stepless) 11.5 CAP WITH LOCK The fuel tank filler port and the hydraulic tank filler port are equipped with locks. Open and close the cap lock as follows. Use the starting key to open and close the cap. 11.5.1 METHOD OF OPENING AND CLOSING CAP WITH LOCK TO OPEN THE CAP (For the fuel tank filler port) 1.
Insert the key into the cap. Insert the key as far as it will go. If the key is turned before it is inserted all the way, it may break. 2. Turn the key clockwise, align the match mark on the cap with the rotor groove, then remove the cap. TO LOCK THE CAP 1. Turn the cap into place. 2. Turn the key counterclockwise and take the key out. 2-26