11. EXPLANATION OF COMPONENTS TO OPEN THE CAP (For the hydraulic tank filler port) 1. Insert the key into the cap. Insert the key as far as it will go. If the key is turned before it is inserted all the way, it may break. 2. Turn the key counterclockwise and bring the rotor groove in line with the aligning mark on the cap. Turn the cap slowly until a “clicking” sound is made. This releases the lock and allows the cap to be opened. TO LOCK THE CAP 1. Turn the cap into place. 2. Turn the key clockwise and take the key out. 11.6 SAFETY BAR WARNING Always use the safety bar for maintenance or when trans- porting the machine. Always remove the safety bar during normal travel opera- tions.
The safety bar is used during maintenance or when transporting the machine. It locks the front frame and rear frame, and prevents the front and rear frames from bending. 11.7 TOWING PIN The towing pin is in the counterweight. Pull the towing pin up to remove it. When installing the towing pin, insert it securely to prevent it from coming out. 2-27