Prevention TIRES AND WHEELS Correct tire pressure is crucial. Consult the General Maintenance section of this Operator’s Manual for tire pressure guidelines. Incorrect tire pressure can cause poor handling, instability, and a loss of ATV control. While checking the tire pressure, inspect the tread and sidewalls of the tires for cracks, cuts, or other damage that could indicate they need to be replaced. PREVENTION CHECK: 1. Tire pressure 2. Tire surface (tread and sidewalls) CONTROLS AND CABLE With the engine running and brake applied, check all transmission positions: low, high, neutral, and reverse. CHECK: 1. High/Low 2. Neutral 3. Reverse A. Brakes Depress the brake pedal.
If either it feels soft or “squishy,” it could be low on fl uid or have a leak — refer to the General Maintenance section of this Operator’s Manual for instructions. Don’t use the ATV until the brakes are operating normally. Test the brake lever lock and see if it locks the wheels; then disengage it to release the brake. CHECK: 1. Hand brake lever 2. Brake pedal 3. Parking brake lock 27 T C L O C TIRES AND WHEELS CONTROLS AND CABLES LIGHTS AND ELECTRIC OIL AND FUEL CHASSIS