n Note: Clock memory power is supplied through the 15-amp accessory fuse and verifi ed during gauge “power-up” and reset. In the event of clock memory power failure (blown fuse, etc.), the gauge will “power-up,” reset, and shut down repeatedly until clock memory power is resto- red. Always check the 15-amp accessory fuse if this gauge condition is noted. D. To reset the trip meter, press and hold the Adjust Button (1) until TRIP is displayed in the display; then press and hold the Adjust/Set Button (1) and Mode Button (2) until the trip meter reads 0. Shift Lever To engage the high range from neutral, apply the brakes and move the shift lever forward.
To engage the low range from high range, apply the brakes and move the shift lever outward and forward. To engage reverse gear from neu- tral, apply the brakes and move the shift lever outward and rearward into the R position. KM203A GENERAL INFORMATION ! WARNING Never shift the ATV into reverse gear when the ATV is moving as it could cause the ATV to stop suddenly throwing the operator from the ATV. Foot Brake Pedal or Left Hand Brake Lever Pressing the foot brake pedal downwards or compressing the hand brake lever will apply the bra- ke to the front and rear wheels. KM130 63