Right Hand Brake Lever The right hand brake lever is con- sidered to be the auxiliary brake. Apply the brake by compressing the lever toward the handlebar. Brake Lever lock (Parking Brake) To engage and release the brake lever lock, use the following pro- cedure. 1. Pull the right hand brake lever. 2. While pushing forward on the brake lever lock, squeeze the brake lever. n Note: It will click as it engages and the brake lever will not return to its re- leased position. 4. Release the brake lever lock by squeezing the brake lever. It will return to its released position. Check to make sure the brake lever lock engages properly and that the brake (when engaged) locks the rear wheels. 1.
Engage the brake lever lock. 2. Attempt to push the ATV. n Note: The brake lever lock must lock the wheels. If it doesn’t, take the ATV to an authorized Arctic Cat ATV dealer for service. ! WARNING Always check to be sure that the brake lever lock has been disen- gaged before operating the ATV. An accident could result if the bra- ke lever lock is left engaged while the ATV is operated. The brake may relax if left engaged for a long period of time. This could cause an accident; therefore, do not leave the ATV on a hill depending on the brake lever lock. Always block the downhill side of the wheels if leaving the ATV on a hill or park the ATV in a sidehill position. 64