Controls - 30 XT855 Operator’s Manual p Joysticks CMW Item Description Notes 4. Left joystick c00ic224h.eps SAE c00ic219h.eps With work mode switch in tool carrier mode: • To move forward, push. • To move backward, pull. • To go faster in either direction, move farther from neutral. • To stop, return to neutral. IMPORTANT: • Control can perform more than one action at a time. Using them together, operator can “feather” or combine operations. • For steering instructions, see page 48. With work mode switch in excavator mode: • To swing excavator to right, move right. • To swing excavator to left, move left. • To raise boom, pull. • To lower boom, push. IMPORTANT:
SAE excavator control pattern is shown. For information about ISO control pattern, see page 68. 5. Boom offset switch c00ic227h.eps To swing boom to right, press right side. To swing boom to left, press left side.