Текст документа
Overview
XT855 Operator’s Manual Overview - 1 p Overview Chapter Contents Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 2 Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Unit Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operator Orientation. . . . . . . . . . . . . . . . . . . . . . . . . 4 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Bulleted Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Numbered Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 CMW
Стр. 2
Serial Number Location
Overview - 2 XT855 Operator’s Manual p Serial Number Location Serial Number Location Record serial numbers and date of purchase in spaces provided. XT855 Tier 4i serial number is located as shown. Date of manufacture Date of purchase XT855 Tier 4i serial number Engine serial number Attachment serial number(s) CMW
Стр. 3
Equipment Modification
XT855 Operator’s Manual Overview - 3 Intended Use p Intended Use The XT855 is a ride-on, track-driven excavator/tool carrier unit designed for light-to medium-duty construction work. The XT855 excavator allows 260° swing and digging depths to 83” (2.1 m). The XT855 lift arms have a quick attach mount plate which makes it easy for an operator to connect different attachments. The unit is designed for operation in temperatures typically experienced in earth moving and construction work environments. Provisions may be required to operate in extreme temperatures. Contact your Ditch Witch dealer. Use in any other way is considered contrary to the intended use.
The XT855 should be operated, serviced, and repaired only by persons familiar with its particular characteristics and acquainted with the relevant safety procedures. Equipment Modification This equipment was designed and built in accordance with applicable standards and regulations. Modification of equipment could mean that it will no longer meet regulations and may not function properly or in accordance with the operating instructions. Modification of equipment should only be made by competent personnel possessing knowledge of applicable standards, regulations, equipment design functionality/requirements and any required specialized testing. CMW
Стр. 4
Operator Orientation
Overview - 4 XT855 Operator’s Manual p Unit Components Unit Components 1. attachment receiver plate 5. operator’s station 2. lift arms 6. ROPS/FOPS 3. engine compartment 7. excavator 4. tracks 8. excavator stow lock Operator Orientation 1. Front of unit 2. Right of unit 3. Rear of unit 4. Left of unit Right and left sides of machine are determined by facing front (toward lift arms) of unit while seated in the operator’s station. CMW
Стр. 5