Systems and Equipment - 68 XT855 Operator’s Manual p Excavator Control Pattern Excavator Control Pattern Change Pattern The XT855 is built to operate according SAE specifications, but can be modified to operate according to ISO specifications. IMPORTANT: Numbers are scribed into hose connectors. These hose numbers are referenced in the instructions below. 1. Disengage excavator stow lock. 2. Fully extend boom and rest bucket on the ground. 3. Change hose positions as shown below. Be careful not to cross hoses near the ends. 4. Verify controls work properly. See “Operate Controls” on page 69 for ISO pattern operation and “Joysticks” on page 28 for SAE pattern operation. SAE ISO Ref.
Description 1 boom cylinder, rod 2 dipper cylinder, rod 3 boom cylinder, barrel Ref. Description 4 dipper cylinder, barrel 5 bucket cylinder, rod 6 bucket cylinder, barrel