Systems and Equipment - 70 XT855 Operator’s Manual p Front Attachments Front Attachments Connect Attachment Attachment IMPORTANT: Use only Ditch Witch approved front attachments. Before connecting attachment to unit, ensure that mount and receiver plates are free of dirt and debris. 1. Position attachment on level surface with enough space behind it to accommodate unit. 2. Ensure that lock pin handles (shown) on mount plate are turned away from center of attachment. 3. Start engine. t05om022c.eps 4. Tilt mount plate (2) forward. 1 2 5. Position mount plate in the upper lip of the receiver plate (1) on attachment. 6. Raise lift arms while tilting back mount plate. IMPORTANT:
Attachment should be raised enough to clear the ground. Mount plate should be tilted back fully. 7. Turn ignition switch off and remove key. t05om026c.eps 8. Rotate lock pin handles toward center of mount plate to secure attachment to lift plate. NOTICE: To ensure proper connection, verify that bottoms of lock pins are visible under attachment receiver plate (shown). t05om027c.eps