HOW TO READ THIS MANUAL EXPLANATION METHOD 1. Operation procedure (1) The operation procedure is described in either pattern A or pattern B below. Pattern A: Explanation of each operation step with a photo or illustration. Pattern B: Explanation of operation procedure by indicating step numbers in one illustration, followed by explanation of cautions and notes summarized as point operations. Example of description in pattern B DISASSEMBLY - INSPECTION - REASSEMBLY Tightening torque unit T = N-m (kg - cm) If a place or part cannot be indicated directly, the part name is described on the either side of the illustration. Example: 1 Piping Disassembly Procedure 1 Remove the cover.
[Point 11 2 Remove the bush [Point 21 cl Operation explained later 3 Remove the gear. Point operations Explanation of key point for operation with an illustration I Disassembly: Put a match mark when removing the pump cover [Point 1 I [Point 21 Inspection: Measure the bush inside diameter. Bush inside diameter limit: 19.1 2 m m (0.7528 in)