14 GETTING TO KNOW YOUR VEHICLE A UTO U NLOCK D OORS Opening/Unlocking With A Key Fob In the Canadian Cargo Vehicle — If Equipped Horn activation settings after a key fob lock command can be adjusted manually through the Uconnect system Ъ page 78. This feature unlocks both front doors (on Canada cargo vehicles), or all doors (on passenger and U.S. cargo vehicles) when the driver door is opened. Push and release the unlock button on the key fob to unlock the front two doors. Push and release the cargo unlock button on the key fob once to unlock the passenger/cargo area (side lateral sliding doors and rear doors). The turn signal lights will flash to acknowledge the unlock signal.
Locking With The Mechanical Key In Passenger Vehicle NOTE: If the front passenger door, or the rear or side door is opened, only the rear or side door is unlocked. S LIDING S IDE D OOR Push the mechanical key release button to expose the mechanical key, insert the key into the driver door exterior lock cylinder and turn the key clockwise to lock all doors. Unlocking With The Mechanical Key In Passenger Vehicle On cargo versions, the sliding side door is fitted with a spring-loaded latch that stops the door from opening any farther. To lock the door in place, simply push the door as far as it will go; to release it, pull forward firmly.
Opening And Closing From Outside The Vehicle Push the mechanical key release button to expose the mechanical key, insert the key into the driver door exterior lock cylinder and turn the key counterclockwise to unlock all doors. Locking With The Mechanical Key In Cargo Vehicle Push the mechanical key release button to expose the mechanical key, insert the key into the driver door exterior lock cylinder and turn the key clockwise to lock the front doors. Insert the key into the rear door exterior lock cylinder and turn the key clockwise to lock the rear doors. Unlocking With The Mechanical Key In Cargo Vehicle Opening/Unlocking With A Key Fob In the Passenger Vehicle And U.S.
Cargo Vehicle — If Equipped Push the mechanical key release button to expose the mechanical key and insert the key into the driver door exterior lock cylinder and turn the key counterclockwise to unlock the front doors. Insert the key into the rear door exterior lock cylinder and turn the key counterclockwise to unlock the rear doors. Grab the side door handle and push towards the front of the vehicle. Once the side door is secured in the full closed position, use one of the prior locking methods to lock the sliding side doors. Opening And Closing From The Inside Closing And Locking From Outside Push and release the unlock button on the key fob to unlock all doors.
Push and release the cargo unlock button on the key fob to unlock only the rear cargo doors. To open one of the sliding side doors, pull the handle out from the bottom, then slide the door towards the rear of the vehicle until it locks into place and cannot go any farther. The turn signal lights will flash to acknowledge the unlock signal. Closing/Locking With A Key Fob Opening: Push and release the lock button on the key fob to lock all doors, including the cargo area (side lateral sliding doors and rear doors). The turn signal lights will flash to acknowledge the lock signal.
Pull the interior door handle to unlock the door, then pull the handle and slide the door towards the rear of the vehicle until it can go no farther.