OPERATION SWITCH PANELS These switches are used to control various functions relating to the machines operating system, it is important the operator become familiar with the switch function and what system they control Without knowledge of all the switch controlled systems damage the machine, property or possibly cause injury to the operator may result. RIGHT SWITCH PANEL 1. Transmission shift mode selector switch 2. Transmission cut-off set switch 3. Cooling fan reverse rotation switch 4. Emergency steering switch (if equipped) 5. (Not used in North America) 6. Torque converter lock-up switch (if equipped) 7. Directional selector actuation switch (if equipped) 8.
Auto greasing switch (if equipped) 9. Torque converter lock-up switch 10. Remote positioner lower mode switch (if equipped) 11. Remote positioner raise/lower set switch (if equipped) 12. Ignition switch 13. Power mode selector switch LEFT FRONT SWITCH PANEL 14. Monitor panel mode selector switch 1 15. Monitor panel mode selector switch 2 16. Front working lamp switch 17. Rear working lamp switch FAR RIGHT SWITCH PANEL (WASTE HANDLER ONLY) 18. Fan directional switch 19. Fan mode switch 20. Auto reverse interval timer Not on Waste Handling applications 2-6 WA480-5L