OPERATION MODE SELECTOR SWITCH 1 Mode selector switch (1) is used to switch the function of the character display on the monitor screen. The basic operation is as follows. Position: To select, confirm or enter a mode or operation. Position: To exit or cancel mode or operation. MODE SELECTOR SWITCH 2 Mode selector switch (2) is used to navigate within the chosen display on the monitor screen. The basic operation is as follows. Position: To go on to the next screen or function, move the cursor forward, or to increase the number when entering numerals Position:
To go back to the previous screen or function, or to move the cursor back, or to reduce the number when entering numerals MONITOR DISPLAY INFORMATION Once you know the operating functions of the mode selector switches (1) and (2) it is important to be able to access this information and navigate within the mode you have selected, below is a list of these mode and how to access and navigate within them. HOUR METER AND ODOMETER DISPLAY An hour meter reading or an odometer reading can be displayed in this mode if desired. Hour Meter Display During normal operation display (1) shows the total time in hours that the machine has been operating.
While the engine is running, the hour meter advances even if the machine is not moving. The hour meter advances by 1 hour of operation, regardless of the engine speed. You can also access the hours on the machine with the ignition switch in the “OFF” position simply by pressing the ( ‘ ) button. Clock (only machines equipped with optional load meter) This display portion (2) shows the time. For details of the method of adjusting the time, see “CLOCK BUTTON/DISPLAYING FREQUENCY” on page 2-45. Even when the ignition switch is at the “OFF” position, the time is displayed while the top ( ‘ ) position of the monitor panel mode selector switch 1 is being pressed. 2-10 WA480-5L