Starter/Starter IMPORTANT: Do not pry on flywheel with a screwdriver. Ceramic magnets and gear case cover can be damaged. 12. Loosen flywheel using a puller. 13. Remove puller, cap screw, washer, and flywheel. M36293 -UN-29JAN90 M98,2060K,10 -19-05NOV85 14. Tighten starter cap screws to 34 ± 1 N·m (300 ± 9 lb-in.). M36439 -UN-29JAN90 M98,2060K,79 -19-26NOV85 CTM2 (19APR90) 60-31 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 IMPORTANT: Do not lubricate crankshaft taper. The crankshaft taper must be dry to hold the flywheel tight. 15. Clean crankshaft taper before installing flywheel. -UN-29JAN90 16. Apply pipe sealant on threads of flywheel cap screw. 17.
Align keyway (A) in flywheel with key (B) in crankshaft and install flywheel. M36297 18. Install washer and cap screw. IMPORTANT: Do not hold flywheel from turning with a prybar in the fins. Doing so may damage the fins. 19. Fasten locking pliers to ring gear to prevent flywheel from turning. -UN-29JAN90 20. Tighten cap screw to 51 ± 3 N·m (38 ± 2 lb-ft). M36298 M98,2060K,80 -19-26NOV85 60 31