Operating AutoPowr Transmission Corner Post And CommandCenter Displays 25 30 C B 20 10 15 MPH km/h RXA0080545 —UN—29APR05 D 0 A 5 5 A E 15 10 F H H G A—Set Speed B—Ground Speed C—Commanded Speed D—Forward Set Speed 2 (FSS2) E—Forward Set Speed 1 (FSS1) F—Reverse Set Speed 1 (RSS1) G—Reverse Set Speed 2 (RSS2) (Lefthand reverser only) H—Full Load Symbol Set Speeds the lever is pushed all the way forward to the end of the speed band slot, commanded speed will equal set speed. A set speed (A) is the maximum ground speed of selected speed band. Set Speed Bar Graph Ground Speed Set Speed bar graph indicates set speed values by their relative position on the graph.
Settings (D) and (E) are examples of Forward Set Speeds and are indicated on top part of graph. Settings (F) and (G) are examples of Reverse Set Speeds and are indicated on bottom part of graph. The ground speed (B) value on tractors equipped with radar will always show a lower value than the set speed selected if there is measurable wheel slip. Commanded Speed (CommandCenter Display) Commanded speed (C) is determined by any given position of the speed control lever at full engine speed. If OURX935,00004BC 1927AUG081/1 Using Creeper Mode maximum of 10 km/h (6.2 mph). Moving the lever back to band 1 restores the previous working speeds.
Creeper mode is entered automatically when a set speed of less than 2 km/h (1.2 mph) is selected in speed band 1. The default ratio between speed bands 1 and 2 is 2.5 in creeper mode. This is done to eliminate rapid acceleration when lever is moved into range 2. For example, if speed band 1 is set at 100 m/h (328.1 ft/h), the corresponding maximum speed in band 2 is 250 m/h (820.2 ft/h). The default ratio may be temporarily overridden (such as when making headland turns) by increasing speed band 2 to a Creeper mode is exited when Set Speed 1 is adjusted above 2 km/h (1.2 mph) or Set Speed 2 is adjusted above 10 km/h (6.2 mph). Reverse set speeds are 1:1 ratio to forward.
The ratio may be temporarily overridden by increasing reverse speed band. Moving the reverser back to forward restores previous working speeds and 1:1 ratio. OURX935,00004BD 1927AUG081/1 429 122208 PN=106