SPECIFICATIONS 19 Engine Stiffening Frame Step 1: Tighten the bolts 1-24 in numerical order....................40 ± 5 Nm (30 ± 4 ft-lb) Step 2: Tighten the bolts 1-24 in numerical order (angle tightening) .....90 ± 5 degrees T2022728 Note: These bolts should not be reused. T2022337 Note: Apply sealant outside the groove as illustrated, maximum 20 minutes before mounting. Thickness of sealant bead: 2 mm (0.079 inch)