OPERATING THE MACHINE 9 - Connect the hydraulic hoses of the multi-purpose bucket to the quick attach couplers (2) (fig. 75_161) and (3) (fig. 75_275). 10 - Lock the quick-change unit by setting the control lever for special equipment into position ‘2’ (fig. 75_042). 1 2 75_161 11 - Set the change-over lever for the additional control circuit into position '1' (fig. 75_160). You can now operate the multi-purpose bucket with the con- trol lever for special equipment (fig. 75_042). 2 Position '1': Close multi-purpose bucket Position '0'. Neutral position Position '2':
Open multi-purpose bucket 1 75_160 If the work unit is not properly attached, it can suddenly fall down and cause severe accidents. Carefully lift the work unit and check whether it is com- pletely locked in by slowly tipping it in and then dumping it. 3 12 - Check whether the work unit is completely locked in by tip- ping it in and then dumping it. 75_275 3 2 0 1 75_042 92